The recommended land pattern for the MCWR04X5600FTL is a rectangular pad with a size of 1.3mm x 0.8mm, with a non-solder mask defined (NSMD) pad shape. This ensures proper soldering and minimizes the risk of solder bridging.
The MCWR04X5600FTL is rated for operation up to 125°C, but it's essential to consider the derating curve and ensure that the component does not exceed its maximum power rating at elevated temperatures. Additionally, the PCB material and soldering process should be suitable for high-temperature applications.
To ensure proper soldering, use a soldering iron with a temperature range of 220°C to 250°C, and apply a small amount of solder paste to the pads. Use a reflow oven or a hot air gun to solder the component, and ensure that the solder joints are clean and free of oxidation.
The MCWR04X5600FTL should be stored in a dry, cool place with a temperature range of 5°C to 30°C and a relative humidity of 60% or less. Avoid exposing the component to direct sunlight, moisture, or extreme temperatures during storage.
The MCWR04X5600FTL is designed for general-purpose use and may not be suitable for high-frequency applications above 100 MHz. If you need a high-frequency resistor, consider using a component specifically designed for high-frequency applications, such as a thin-film resistor.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MCWR04X5600FTL Overview
Use the download button to access the MCWR04X5600FTL schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MCWR0,
or try a keyword search, such as Fixed Resistors
