Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MDW1016 - Minmax

Description: The MDW1000 series is a range of isolated 2W DC-DC converter modules featuring fully regulated output voltages and wide 2:1 input voltage ranges. The products come in a compact DIP-16 package. An excellent efficiency allows an operating temperature range of -40℃ to +80℃.

Download MDW1016 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MDW1016 - Minmax - PCB symbol
click to zoom
PCB Footprints
MDW1016 - Minmax PCB footprint - Other - Other - DIP-16_2024
click to zoom
3D Models
MDW1016 - Minmax - 3D model - Other - DIP-16_2024
click to zoom

MDW1016 Details

  • Manufacturer Part Number:

    MDW1016

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    DIP-16/6

  • ECCN Code:

    EAR99

  • Manufacturer:

    Minmax Technology Co Ltd

  • YTEOL:

    5

  • Additional Feature:

    -12V ADDITIONAL OUTPUT AVAILABLE

  • Analog IC - Other Type:

    DC-DC REGULATED POWER SUPPLY MODULE

  • Approvals:

    CB, CSA, CUL, EN, IEC, UL

  • Efficiency (Main Output):

    69%

  • Input Voltage-Max:

    9 V

  • Input Voltage-Min:

    4.5 V

  • Input Voltage-Nom:

    5 V

  • JESD-30 Code:

    R-PDIP-P6

  • Length:

    23.8 mm

  • Line Regulation-Max:

    0.5%

  • Load Regulation-Max:

    0.75%

  • Number of Functions:

    1

  • Number of Outputs:

    2

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    80 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Current-Max:

    0.083 A

  • Output Voltage-Max:

    12.24 V

  • Output Voltage-Min:

    11.76 V

  • Output Voltage-Nom:

    12 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    DIP

  • Package Equivalence Code:

    DIP6/16,.4

  • Package Shape:

    RECTANGULAR

  • Package Style:

    IN-LINE

  • Protections:

    OVER CURRENT, SHORT CIRCUIT

  • Ripple Voltage (Main Out):

    0.017675 Vrms

  • Seated Height-Max:

    8.25 mm

  • Surface Mount:

    NO

  • Technology:

    HYBRID

  • Terminal Form:

    PIN/PEG

  • Terminal Pitch:

    2.54 mm

  • Terminal Position:

    DUAL

  • Total Power Output-Max:

    2 W

  • Trim/Adjustable Output:

    NO

  • Width:

    13.7 mm

MDW1016 Frequently Asked Questions (FAQs)

  • Minmax recommends a 4-layer PCB with a solid ground plane, and thermal vias under the device to dissipate heat. A minimum of 1 oz copper thickness is recommended. Additionally, a thermal pad on the bottom of the device should be connected to a heat sink or a thermal interface material.
  • To ensure stability, follow the recommended component values and PCB layout in the datasheet. Additionally, add a 10nF to 22nF ceramic capacitor in parallel with the output capacitor to reduce noise and prevent oscillations. Also, ensure the input capacitor is placed close to the device's input pins.
  • The maximum allowed voltage on the EN pin is 6V. To protect it from overvoltage, use a voltage divider or a zener diode to limit the voltage to 5V or less. Additionally, add a 1kΩ to 10kΩ resistor in series with the EN pin to limit the current.
  • The output voltage ripple can be calculated using the formula: ΔVout = (Iout * ESL) / (Cout * fsw), where ESL is the equivalent series inductance of the output capacitor. Minmax recommends using low-ESR ceramic or polymer capacitors with a minimum capacitance of 10μF and a voltage rating of 2x the output voltage.
  • Minmax recommends using a low-ESR ceramic or film capacitor with a minimum capacitance of 10μF and a voltage rating of 2x the input voltage. The capacitor should be placed close to the device's input pins to reduce noise and improve performance.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MDW1016 Overview

Use the download button to access the MDW1016 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MDW10, or try a keyword search, such as Other Signal Circuits

Parts related to MDW1016

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑