Description:As the smallest encapsulated 6 Watt industrial DC DC converter, MDWI06 series features low no load power consumption, fully regulated output voltage, and a shielded metal case with an insulated baseplate, able to provide up to 87% efficiency and instantaneous load capacity.
The recommended PCB layout involves keeping the input and output capacitors close to the converter, using a solid ground plane, and minimizing the loop area of the input and output traces. For thermal management, ensure good airflow around the converter, and consider adding a heat sink or thermal interface material if operating in high-temperature environments.
To ensure EMC compliance, follow proper PCB layout and shielding guidelines, use a metal enclosure, and consider adding EMI filters or shielding components to the input and output lines. Additionally, ensure that the converter is operated within its specified frequency range and that the system meets the relevant EMC standards.
The maximum allowable capacitance on the output depends on the specific application and the converter's output impedance. As a general guideline, the output capacitance should not exceed 10-20 times the converter's output capacitance (typically 10-20uF). Excessive output capacitance can affect the converter's stability and performance.
Yes, the MDWI06-24D15 can be used in redundant or parallel configurations, but it requires careful design and consideration of the system's overall architecture, including synchronization, current sharing, and fault tolerance. Consult with a qualified engineer or the manufacturer for specific guidance.
The derating curves for temperature and altitude can be obtained from the manufacturer or through direct consultation. As a general guideline, the converter's power rating should be derated by 1-2% per degree Celsius above 40°C, and by 1-2% per 1,000 feet above sea level.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MDWI06-24D15 Overview
Use the download button to access the MDWI06-24D15 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MDWI0,
or try a keyword search, such as Power Supply Modules
