Description:Two Package Choices: Standard TO-220 or isolated TO-220; Motorola "6 SIGMA" Philosophy Provides Tight and Reproducible Parametric Distributions; Full Characterization at 125°C; Improved Efficiency Due to Low Base Drive Requirements: - High and Flat DC Current Gain h FE - Fast Switching - No Coil Required in Base Circuit for Turn-Off (No Current Tail); MJF18004, Case 221D, is UL Registered at 3500 VRMS: File #E69369; Pb-Free Packages are Available
The maximum safe operating area (SOA) for the MJF18004G is not explicitly stated in the datasheet, but it can be estimated based on the device's thermal resistance and maximum junction temperature. A general rule of thumb is to limit the device's power dissipation to 1/4 of the maximum rated power to ensure reliable operation.
To ensure the MJF18004G is properly biased for linear operation, the base-emitter voltage (Vbe) should be set between 0.6V to 0.8V, and the collector-emitter voltage (Vce) should be set between 1V to 5V. Additionally, the collector current (Ic) should be limited to the recommended maximum value to prevent thermal runaway.
For optimal thermal performance, the MJF18004G should be mounted on a PCB with a large copper area (e.g., a copper pour) connected to the collector pin. The PCB should also have adequate thermal vias to dissipate heat. A heat sink or thermal interface material can also be used to improve thermal performance.
While the MJF18004G is primarily designed for linear applications, it can be used in switching applications with some caution. However, the device's switching characteristics (e.g., rise and fall times, switching losses) may not be optimized, and the device may not be suitable for high-frequency switching applications.
To protect the MJF18004G from ESD, it is recommended to handle the device with an anti-static wrist strap or mat, and to use ESD-protected workstations and tools. Additionally, the device should be stored in an anti-static bag or container when not in use.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MJF18004G Overview
Use the download button to access the MJF18004G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MJF18,
or try a keyword search, such as Power Bipolar Transistors
