Description:The MK74CB218 Buffalo™ is a monolithic CMOS high speed clock driver. It consists of two identical single input to eight low-skew output, non-inverting clock drivers. This eliminates concerns of part to part matching in many systems. The MK74CB218 is packaged in the tiny 28-pin SSOP, which uses the same board space as the narrow 16-pin SOIC. The inputs can be connected together for a 1 to 16 fanout buffer. A quad 1 to 4, and PECL versions, are also available. Consult IDT for more details. The MK74CB218 can a
Renesas provides a recommended PCB layout guide in their application note (APN) documents, which can be found on their website. The guide includes thermal vias, heat sink recommendations, and PCB layer stack-up suggestions to minimize thermal resistance and ensure optimal performance.
The MK74CB218RLFTR has a built-in POR and BOD circuit. To implement POR, connect the VCC pin to a power supply and ensure a stable voltage supply during power-up. For BOD, connect the VCC pin to a voltage detector circuit, and the BOD pin to a reset circuit. Refer to the datasheet and application notes for specific implementation details.
According to the datasheet, the maximum allowed voltage on the input pins during power-down or reset is VCC + 0.5V. Exceeding this voltage may cause damage to the device. Ensure that input signals are within the specified voltage range to prevent damage.
To ensure clock signal integrity and minimize jitter, use a high-quality clock source, such as a crystal oscillator or a clock generator. Implement proper PCB layout techniques, such as using a dedicated clock trace, minimizing trace length, and avoiding vias. Additionally, consider using a clock buffer or jitter attenuator if necessary.
Renesas recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the input pins to protect against electrostatic discharge. Additionally, follow proper PCB design and layout guidelines, such as using a ground plane, minimizing trace length, and avoiding sharp corners, to reduce the risk of ESD damage.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MK74CB218RLFTR Overview
Use the download button to access the MK74CB218RLFTR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MK74C,
or try a keyword search, such as Clock Drivers
