The recommended land pattern for the MLG0603P3N5BT000 is a rectangular pad with a size of 0.6mm x 0.3mm, with a non-solder mask defined (NSMD) pad shape. The pad should be centered on the component and have a clearance of at least 0.1mm from the component body.
To minimize the impact of PCB layout and routing on the inductor's performance, it is recommended to keep the PCB traces as short and wide as possible, avoid routing high-frequency signals near the inductor, and use a solid ground plane under the inductor. Additionally, it is recommended to follow the manufacturer's recommended layout guidelines and to simulate the PCB design using a 3D electromagnetic simulator.
The MLG0603P3N5BT000 inductor has a maximum operating temperature range of -40°C to +125°C. However, the inductor's performance may degrade at temperatures above 85°C, and it is recommended to derate the inductor's current rating accordingly.
To ensure proper soldering of the MLG0603P3N5BT000 inductor to the PCB, it is recommended to use a soldering iron with a temperature of 250°C to 270°C, and to apply a small amount of solder paste to the pads. The inductor should be placed on the PCB using a pick-and-place machine or by hand, and then reflowed in a solder reflow oven. It is also recommended to inspect the solder joints visually and to perform a pull test to ensure the inductor is securely attached to the PCB.
The equivalent series resistance (ESR) of the MLG0603P3N5BT000 inductor is not explicitly specified in the datasheet. However, the ESR can be estimated based on the inductor's DC resistance and the frequency of operation. As a rough estimate, the ESR of this inductor is around 0.1 ohms to 0.5 ohms at frequencies up to 1 MHz.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MLG0603P3N5BT000 Overview
Use the download button to access the MLG0603P3N5BT000 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MLG06,
or try a keyword search, such as Fixed Inductors
About TDK
TDK-Lambda is a global supplier of power supplies and related products. It is a subsidiary of TDK Corporation, a leading electronics company based in Japan. TDK-Lambda specializes in designing and manufacturing a wide range of AC-DC power supplies, DC-DC converters, programmable power supplies, and EMC/EMI filters for various industries and applications.
