The recommended land pattern for the MLG1005S1N0STD25 can be found in the TDK Corporation's application note or on their website. It typically includes a rectangular pad with a size of around 1.2mm x 1.4mm, with a 0.3mm hole in the center for the inductor's terminal.
The MLG1005S1N0STD25 has a maximum operating temperature of 125°C. To handle thermal considerations, ensure good airflow around the component, avoid overheating, and consider using a heat sink or thermal pad if necessary. Also, follow the recommended derating curves for the inductor's current rating vs. temperature.
The self-resonant frequency of the MLG1005S1N0STD25 is not explicitly stated in the datasheet, but it can be estimated using the inductor's inductance value and the parasitic capacitance. Typically, it falls in the range of 100-500 MHz. However, it's recommended to consult with TDK Corporation's application engineers or perform your own measurements to determine the exact self-resonant frequency.
The MLG1005S1N0STD25 is designed for general-purpose use and has a relatively low self-resonant frequency. While it can be used in high-frequency applications, its performance may degrade above 100 MHz. For high-frequency applications, consider using a more specialized inductor designed for high-frequency use, such as TDK's high-frequency inductor series.
To ensure the MLG1005S1N0STD25 meets your specific application's requirements, consult with TDK Corporation's application engineers or perform your own testing and evaluation. Consider factors such as the inductor's inductance value, DC resistance, and saturation current, as well as the operating frequency, temperature, and environmental conditions.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MLG1005S1N0STD25 Overview
Use the download button to access the MLG1005S1N0STD25 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MLG10,
or try a keyword search, such as Fixed Inductors
About TDK
TDK-Lambda is a global supplier of power supplies and related products. It is a subsidiary of TDK Corporation, a leading electronics company based in Japan. TDK-Lambda specializes in designing and manufacturing a wide range of AC-DC power supplies, DC-DC converters, programmable power supplies, and EMC/EMI filters for various industries and applications.
