A good PCB layout for the MMPQ2222A involves keeping the input and output traces as short as possible, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
To ensure proper biasing, the MMPQ2222A requires a voltage divider network to set the output voltage. The recommended biasing circuit consists of two resistors (R1 and R2) connected between the output pin and the adjust pin, with R1 being 1 kΩ and R2 being 2.2 kΩ. This sets the output voltage to approximately 5V.
The MMPQ2222A can handle input voltages up to 40V, but it's recommended to keep the input voltage below 30V for optimal performance and to prevent overheating.
To protect the MMPQ2222A from overcurrent and overheating, it's recommended to add an external current limiting resistor in series with the input voltage, as well as a thermal shutdown circuit to turn off the device in case of overheating.
The MMPQ2222A is rated for operation up to 125°C, but it's recommended to derate the output current and input voltage at high temperatures to prevent overheating and ensure reliable operation.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MMPQ2222A Overview
Use the download button to access the MMPQ2222A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MMPQ2,
or try a keyword search, such as Small Signal Bipolar Transistors
Suggested Parts
If you searched for MMPQ2222A, you might also be interested in these parts: