The MP1584EN-LF-Z can handle input voltages up to 28V, but it's recommended to keep it below 24V for optimal performance and reliability.
To ensure stability, make sure to use the recommended output capacitor values and types, and keep the output voltage within the specified range. Also, ensure that the input voltage is within the recommended range and the input capacitor is properly sized.
The MP1584EN-LF-Z can provide up to 2A of output current, but it's recommended to derate the output current based on the ambient temperature and the input voltage to ensure reliable operation.
The output voltage of the MP1584EN-LF-Z can be adjusted by using a resistor divider network between the output and the FB pin. The output voltage can be calculated using the formula: Vout = 0.8V x (R1 + R2) / R2, where R1 and R2 are the resistors in the divider network.
The EN (enable) pin is used to turn the regulator on or off. When the EN pin is pulled high, the regulator is enabled, and when it's pulled low, the regulator is disabled. This pin can be used to implement power sequencing or to turn off the regulator when not in use.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MP1584EN-LF-Z Overview
Use the download button to access the MP1584EN-LF-Z schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like MP158,
or try a keyword search, such as Switching Regulator or Controllers
Suggested Parts
If you searched for MP1584EN-LF-Z, you might also be interested in these parts:
