SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE, SHRINK PITCH
Packing Method:
TR
Peak Reflow Temperature (Cel):
260
Seated Height-Max:
1.1 mm
Supply Current-Max:
1.1 mA
Supply Voltage-Max:
36 V
Supply Voltage-Min:
6 V
Supply Voltage-Nom:
24 V
Surface Mount:
YES
Temperature Grade:
AUTOMOTIVE
Terminal Finish:
Tin (Sn)
Terminal Form:
GULL WING
Terminal Pitch:
0.65 mm
Terminal Position:
DUAL
Time@Peak Reflow Temperature-Max (s):
30
Width:
3 mm
MP24895-AGH-Z Frequently Asked Questions (FAQs)
A good PCB layout for the MP24895-AGH-Z should prioritize thermal dissipation. Place the device near a thermal pad or a heat sink, and ensure that the thermal vias are connected to a solid copper plane on the bottom layer. Keep the high-current paths short and wide, and avoid routing high-frequency signals near the device.
To optimize output voltage accuracy, ensure that the input voltage is within the recommended range, and the output voltage is set using a high-precision resistor divider network. Additionally, minimize the noise on the FB pin by using a low-noise voltage reference and a quiet analog ground plane.
The MP24895-AGH-Z can drive a maximum capacitive load of 10uF. However, it's recommended to derate the capacitive load based on the output voltage and frequency to ensure stable operation.
To prevent oscillations and ringing on the output, ensure that the output filter components (e.g., L-C filter) are properly selected and placed close to the device. Additionally, use a low-ESR output capacitor and a high-quality inductor with a low series resistance.
A low-ESR ceramic capacitor with a value of 4.7uF to 10uF is recommended for the input capacitor. This helps to filter out high-frequency noise and ensure stable operation.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MP24895-AGH-Z Overview
Use the download button to access the MP24895-AGH-Z 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MP248,
or try a keyword search, such as Display Drivers
