The recommended PCB layout for optimal thermal performance involves placing the device on a 2-layer or 4-layer board with a solid ground plane on the bottom layer, and using thermal vias to connect the exposed pad to the ground plane. Additionally, keeping the copper traces wide and short can help to reduce thermal resistance.
To ensure reliable start-up and operation with a high-impedance input source, it is recommended to add a 1-2uF ceramic capacitor between the VIN pin and the input source, and a 10-22uF electrolytic capacitor between the VIN pin and GND. This helps to filter out noise and provide a stable input voltage.
The maximum allowed voltage on the EN pin is 6V. Exceeding this voltage may damage the device. It is recommended to use a voltage divider or a clamp circuit to limit the voltage on the EN pin to within the recommended range.
The output voltage can be adjusted by using an external resistor divider network between the VOUT pin and the GND pin. The datasheet provides a formula to calculate the required resistor values for a specific output voltage. Additionally, the MP2760GVT-000A-Z has a adjustable output voltage version, MP2760GVT-000A-Z-ADJ, which allows the output voltage to be adjusted from 0.8V to 5.5V using an external resistor divider network.
The recommended input capacitor type is a low-ESR ceramic capacitor with a value of 10-22uF. This helps to filter out noise and provide a stable input voltage. The capacitor should be placed as close as possible to the VIN pin and the GND pin.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MP2760GVT-000A-Z Overview
Use the download button to access the MP2760GVT-000A-Z 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MP276,
or try a keyword search, such as Power Management Circuits
