MPL-AL5050-8R2 footprint, schematic symbol and 3D model by Monolithic Power Systems (MPS)

Symbol

PCB Footprints

3D Models

MPL-AL5050-8R2 Details

The recommended PCB layout for optimal thermal performance involves placing the device on a 2-layer or 4-layer board with a solid ground plane on the bottom layer, and using thermal vias to connect the exposed pad to the ground plane. Additionally, keeping the copper traces wide and short can help to reduce thermal resistance.
To ensure the device is properly biased, make sure to connect the EN pin to a logic-level input (e.g. 3.3V or 5V) and the VIN pin to a stable input voltage within the recommended range (4.5V to 18V). Also, ensure that the output voltage is set correctly using the FB pin and the desired output voltage divider resistors.
The maximum output current capability of the MPL-AL5050-8R2 is 5A. However, it's recommended to derate the output current based on the ambient temperature and the PCB layout to ensure reliable operation.
To protect the device from overvoltage and undervoltage conditions, consider adding overvoltage protection (OVP) and undervoltage lockout (UVLO) circuits to the input voltage rail. Additionally, ensure that the input voltage is within the recommended range and that the device is properly biased.
The recommended input capacitor type is a low-ESR ceramic capacitor with a value of 10uF to 22uF. This helps to filter out input voltage noise and ensure stable operation.

Community Provided

System Verified

Community Approved

Use the download button to access the MPL-AL5050-8R2 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like MPL-A, or try a keyword search, such as Fixed Inductors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →