- Datasheet Download Datasheet
- Stock & Prices $ Price & Stock for MPSA13G
- Part Number MPSA13G
- Manufacturer onsemi
- Pin Count 3
- Part Category Transistor Darlington Pair
- Package Category Other
- Footprint Name Other - TO−92 (TO−226) CASE 29−11 ISSUE AM_2024-1
- Released Date Jun 2, 2024
- Last Modified Date Sep 19, 2024 2:45 PM UTC
- Pinout / Pin List Click Here (Member Only)
MPSA13G Details
-
Manufacturer Part Number:
MPSA13G
-
Brand Name:
onsemi
-
Pbfree Code:
Yes
-
Rohs Code:
Yes
-
Part Life Cycle Code:
Obsolete
-
Part Package Code:
TO-92 (TO-226) 5.33mm Body Height
-
Package Description:
LEAD FREE, CASE 29-11, TO-226, 3 PIN
-
Pin Count:
3
-
Manufacturer Package Code:
29-11
-
ECCN Code:
EAR99
-
Manufacturer:
onsemi
MPSA13G Frequently Asked Questions (FAQs)
-
The maximum safe operating area (SOA) for the MPSA13G is not explicitly stated in the datasheet, but it can be estimated based on the device's thermal resistance and maximum junction temperature. A general rule of thumb is to limit the device's power dissipation to 1/4 of the maximum rated power to ensure reliable operation.
-
To ensure the MPSA13G is properly biased for linear operation, you should ensure that the base-emitter voltage (Vbe) is between 0.6V to 0.8V, and the collector-emitter voltage (Vce) is at least 1V to 2V higher than the base-emitter voltage. Additionally, the collector current should be limited to the recommended maximum value to prevent thermal runaway.
-
For optimal thermal management, it is recommended to use a PCB with a large copper area for heat dissipation, and to place the MPSA13G near a heat sink or a thermal pad. The device should be mounted on a PCB with a thermal via or a thermal pad to improve heat dissipation. Additionally, the PCB layout should be designed to minimize thermal resistance and ensure good airflow around the device.
-
To protect the MPSA13G from electrostatic discharge (ESD), it is recommended to handle the device with an anti-static wrist strap or mat, and to use ESD-protected workstations and tools. Additionally, the device should be stored in an anti-static bag or container, and the PCB should be designed with ESD protection circuits, such as TVS diodes or ESD protection arrays.
-
The MPSA13G should be stored in a cool, dry place, away from direct sunlight and moisture. The device should be handled with clean, dry gloves, and should not be exposed to mechanical stress or vibration. The device should be stored in an anti-static bag or container, and should not be exposed to temperatures above 150°C or below -40°C.
Trust Checks
Manufacturer Collaborated
System Verified
Community Approved
MPSA13G Overview
Use the download button to access the MPSA13G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MPSA1,
or try a keyword search, such as Small Signal Bipolar Transistors