A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the RF traces as short as possible and use 50-ohm microstrip lines. Avoid vias and thermal pads under the device.
Use the lowest possible supply voltage, disable the bias circuit when not in use, and optimize the output power to the minimum required for the application. Also, consider using a power-saving mode or shutdown mode when the device is not transmitting.
The MRF586 can operate from -40°C to +85°C, but the optimal operating temperature range is between 0°C to 70°C for maximum performance and reliability.
Check the PCB layout and ensure that the RF traces are properly matched and terminated. Verify that the supply voltage and current are within the recommended range. Also, check for any signs of overheating or damage to the device.
Yes, the MRF586 can be used in a push-pull configuration to achieve higher output power. However, this requires careful design and layout considerations to ensure proper impedance matching and minimal electromagnetic interference.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MRF586 Overview
Use the download button to access the MRF586 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MRF58,
or try a keyword search, such as RF Small Signal Bipolar Transistors
