Masach Tech recommends a 4-layer PCB with a dedicated ground plane and thermal vias under the device. A heat sink with a thermal interface material is also recommended to maintain a junction temperature below 125°C.
Masach Tech suggests using a robust PCB design with a secure mounting mechanism, and applying a conformal coating to protect the device from moisture and contaminants. Additionally, ensure that the device is properly soldered and secured to the PCB.
According to Masach Tech, the maximum allowable voltage transient on the input pins is ±20% of the rated input voltage for a duration of up to 100ms. Exceeding this limit may damage the device.
Yes, the MS183-20C can be used in a parallel configuration to increase output current. However, Masach Tech recommends using a current-sharing scheme, such as a dedicated current-sharing IC or a resistive divider network, to ensure equal current distribution among the devices.
The typical start-up time for the MS183-20C is around 10ms, and the settling time is approximately 50ms. These times may vary depending on the input voltage, output load, and PCB layout.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MS183-20C Overview
Use the download button to access the MS183-20C 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MS183,
or try a keyword search, such as EMI / RFI Shields
