Masach Tech recommends a 4-layer PCB with a solid ground plane, and to keep the input and output traces as short as possible to minimize noise and EMI. A sample layout is available upon request.
The MS402-10C has a thermal pad on the bottom of the package. Ensure good thermal contact with a heat sink or a metal core PCB. A thermal interface material (TIM) can be used to fill any gaps. Keep the ambient temperature below 40°C for optimal performance.
The MS402-10C can withstand voltage transients up to 1.5 times the nominal input voltage for a duration of 100ms. Exceeding this may cause damage to the device.
Yes, the MS402-10C can be used in redundant or parallel configurations to achieve higher power ratings or improved reliability. However, careful consideration must be given to the system design to ensure proper synchronization and fault detection.
The typical start-up time of the MS402-10C is around 10-15ms, depending on the input voltage and output load. This can be affected by the external components and system design.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MS402-10C Overview
Use the download button to access the MS402-10C 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MS402,
or try a keyword search, such as Visible LEDs
