Part Image

MSP430F2619TZCA - Texas Instruments

Description: 16-bit Microcontrollers - MCU 16 MHz MCU with 128KB FRAM, 8KB SRAM, AES, 12-bit ADC, comparator, DMA, UART/SPI/I2C, timer 113-NFBGA -40 to 105

Download MSP430F2619TZCA Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MSP430F2619TZCA - Texas Instruments PCB footprint - BGA - BGA - ZCA0113A
click to zoom
3D Models
MSP430F2619TZCA - Texas Instruments  - 3D model - BGA - ZCA0113A
click to zoom

MSP430F2619TZCA Details

  • Manufacturer Part Number:

    MSP430F2619TZCA

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Country Of Origin:

    Philippines

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.31.00.30

  • Date Of Intro:

    2020-04-21

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Has ADC:

    YES

  • Additional Feature:

    ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 4.15 MHZ

  • Bit Size:

    16

  • Boundary Scan:

    YES

  • CPU Family:

    MSP430

  • Clock Frequency-Max:

    16 MHz

  • DAC Channels:

    YES

  • DMA Channels:

    YES

  • Format:

    FIXED POINT

  • Integrated Cache:

    NO

  • JESD-30 Code:

    S-PBGA-B113

  • JESD-609 Code:

    e1

  • Length:

    7 mm

  • Low Power Mode:

    YES

  • Moisture Sensitivity Level:

    3

  • Number of DMA Channels:

    3

  • Number of I/O Lines:

    48

  • Number of Serial I/Os:

    2

  • Number of Terminals:

    113

  • Number of Timers:

    2

  • On Chip Data RAM Width:

    8

  • On Chip Program ROM Width:

    8

  • Operating Temperature-Max:

    105 °C

  • Operating Temperature-Min:

    -40 °C

  • PWM Channels:

    NO

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    VFBGA

  • Package Equivalence Code:

    BGA113,12X12,20

  • Package Shape:

    SQUARE

  • Package Style:

    GRID ARRAY, VERY THIN PROFILE, FINE PITCH

  • Peak Reflow Temperature (Cel):

    260

  • RAM (bytes):

    4096

  • ROM (words):

    122880

  • ROM Programmability:

    FLASH

  • Seated Height-Max:

    1 mm

  • Speed:

    16 MHz

  • Supply Current-Max:

    0.595 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3.3 V

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Tin/Silver/Copper (Sn/Ag/Cu)

  • Terminal Form:

    BALL

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    BOTTOM

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    7 mm

  • uPs/uCs/Peripheral ICs Type:

    MICROCONTROLLER, RISC

MSP430F2619TZCA Frequently Asked Questions (FAQs)

  • The maximum clock frequency that can be used with the internal oscillator is 16 MHz, but it's recommended to use 12 MHz or lower for optimal performance and to ensure that the device operates within its specifications.
  • To configure the MSP430F2619TZCA for low-power operation, you can use the Power Management Module (PMM) to control the power modes. You can also use the Low Power Mode 3 (LPM3) or Low Power Mode 4 (LPM4) to reduce power consumption. Additionally, you can disable unused peripherals and use the clock system to reduce power consumption.
  • The maximum current that can be sourced or sunk by the GPIO pins is 4 mA per pin, but it's recommended to limit the current to 2 mA per pin to ensure that the device operates within its specifications.
  • The USCI module can be used for UART, SPI, or I2C communication. To use the USCI module, you need to configure the module using the UCSIxCTL register, set the clock source and baud rate, and enable the transmitter and receiver. You can also use the USCI interrupt vectors to handle data transmission and reception.
  • The JTAG (Joint Test Action Group) interface is used for debugging and programming the device. It allows you to connect a debugger or programmer to the device and access the device's memory and registers.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MSP430F2619TZCA Overview

Use the download button to access the MSP430F2619TZCA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MSP43, or try a keyword search, such as Microcontrollers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to MSP430F2619TZCA

Showing 0 results

MSP430F2619TZCA Alternates

Showing results

Image Part Number Model
Part Image MSP430F2619TZCAR Texas Instruments

RISC Microcontroller, 16-Bit, FLASH, MSP430 CPU, 16MHz, CMOS, PBGA113