Coilcraft recommends a land pattern with a pad size of 2.5 mm x 1.5 mm, with a non-solder mask defined (NSMD) pad and a 0.5 mm gap between pads. Refer to Coilcraft's application note AN-40 for more details.
The MSS1583-103MED is rated for operation up to 125°C, but derating is required above 85°C. Consult Coilcraft's temperature derating chart to ensure the inductor meets your application's temperature requirements.
To minimize the risk of mechanical stress affecting the inductor's performance, avoid bending, flexing, or subjecting the component to excessive mechanical force. Use a sturdy PCB and follow proper handling and assembly procedures.
The ESR of the MSS1583-103MED is not explicitly stated in the datasheet, but it can be estimated using the inductor's Q factor and impedance. Contact Coilcraft's technical support for more information or guidance on calculating ESR.
Yes, the MSS1583-103MED is compatible with lead-free soldering processes, including SAC305 and Sn96.5Ag3Cu0.5. However, ensure that your soldering process meets the component's recommended reflow profile.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MSS1583-103MED Overview
Use the download button to access the MSS1583-103MED 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MSS15,
or try a keyword search, such as Fixed Inductors
About COILCRAFT
Colicraft designs and manufactures high performing magnectic components, RF chip inductors, power magnectics, and filters. Coilcraft has engineering, manufacturing, and distribution facilities in North America, Asia, and Europe.
