ETI Systems recommends a 4-layer PCB with a solid ground plane and thermal vias to dissipate heat. A minimum of 2 oz copper thickness is recommended for the power traces. Additionally, a thermal pad on the bottom of the device should be connected to a heat sink or a thermal management system.
The MW22B-5-10K requires a bias voltage of 5V ± 10% and a bias current of 10mA ± 10%. Ensure that the bias voltage is clean and regulated, and that the bias current is limited to prevent overheating. A bias tee or a dedicated bias circuit is recommended.
The MW22B-5-10K is rated for operation from -40°C to +85°C. However, the device's performance and reliability may degrade above +70°C. It is recommended to operate the device within the recommended temperature range for optimal performance and longevity.
The MW22B-5-10K is sensitive to electrostatic discharge (ESD). Handle the device with ESD-safe materials and tools, and ensure that the device is properly grounded during assembly and testing. Consider adding ESD protection devices, such as TVS diodes, to the PCB design.
Store the MW22B-5-10K in a dry, cool place, away from direct sunlight and moisture. Handle the device by the body, avoiding touching the pins or electrical connections. Use anti-static packaging and materials to prevent ESD damage.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MW22B-5-10K Overview
Use the download button to access the MW22B-5-10K 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MW22B,
or try a keyword search, such as Variable Resistors
