Cosel recommends a multi-layer PCB with a large ground plane and thermal vias to dissipate heat. A minimum of 2oz copper thickness is recommended. Ensure good airflow around the converter and avoid blocking the airflow vents.
Follow the recommended PCB layout and grounding scheme. Ensure a minimum of 5mm clearance between the converter and other components. Use shielding and filtering as needed to meet EMC requirements.
The maximum allowable capacitance is 220uF. Exceeding this value may cause instability or oscillation. Use a low-ESR capacitor with a voltage rating of at least 1.5 times the output voltage.
Yes, but ensure proper synchronization and current sharing. Consult Cosel's application note AN-101 for guidelines on parallel operation.
Use a slow-blow fuse with a rating of 2-3 times the maximum input current. Consult the datasheet for specific fuse recommendations.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
NAC-10-472-D Overview
Use the download button to access the NAC-10-472-D 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like NAC-1,
or try a keyword search, such as Mains Filters
