NAU88C10YG footprint, schematic symbol and 3D model by Nuvoton

Symbol

PCB Footprints

3D Models

NAU88C10YG Details

The recommended operating voltage range for NAU88C10YG is 1.8V to 3.6V.
The clock source for NAU88C10YG can be configured using the CLK_SEL[1:0] pins. The internal RC oscillator can be used as the clock source by setting CLK_SEL[1:0] to '00'. Alternatively, an external clock source can be used by setting CLK_SEL[1:0] to '01' or '10'.
The maximum clock frequency supported by NAU88C10YG is 24 MHz.
The NAU88C10YG microcontroller can be reset by pulling the RESET pin low for at least 2 clock cycles. The microcontroller will also reset if the power-on reset (POR) circuit detects a power-on or brown-out condition.
The WDT in NAU88C10YG is a timer that resets the microcontroller if it does not receive a reset signal within a certain time period. This is used to prevent the microcontroller from getting stuck in an infinite loop or other abnormal operation.

Expert Contribution

System Verified

Community Approved

Use the download button to access the NAU88C10YG schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like NAU88, or try a keyword search, such as Codecs

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →