Description:1.8 V +/- 5% Power Supply; 4 channel linear redriver supporting data rates up to 10Gbps; Integrated switch for USB Type-C SBU Signals used for DP AUX Channel; Chip Enable Pin for Deep Power-Saving Mode; Hot-Plug Capable; ESD Protection ± 4kV HBM; Supports USB Type-C USB3.1 Gen 1/ Gen 2 and DP1.4 as an Alternate Mode with device operation modes; Supports SOC's that have integrated USB3.1 & DP1.4 MUX over USB Type-C; Can be utilized in USB Type-C cables to reduce cable losses
A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the signal traces short and away from the power plane to minimize noise and crosstalk.
Use a 100-ohm differential impedance for the clock and data lines, and keep the signal traces as short as possible. Also, use a common mode filter or a common mode choke to reduce electromagnetic interference (EMI).
The NB7VPQ904MMUTWG is rated for operation from -40°C to 125°C, but it's recommended to derate the device for reliable operation above 100°C.
Power up the device in the following sequence: VCC, then VCCA, and finally the input clock. Power down in the reverse sequence to prevent latch-up or damage to the device.
Use a 50-ohm termination resistor in series with a 100-nF capacitor to ground for each output signal to minimize reflections and ensure signal integrity.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
NB7VPQ904MMUTWG Overview
Use the download button to access the NB7VPQ904MMUTWG 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like NB7VP,
or try a keyword search, such as Line Driver or Receivers
