A 2-layer or 4-layer PCB with a solid ground plane and thermal vias is recommended. The device should be placed near a thermal pad or heat sink to dissipate heat efficiently.
Ensure that the input voltage rises and falls monotonically, and that the enable pin is properly biased during start-up and shutdown. A soft-start circuit can also be used to reduce inrush current.
The maximum allowed voltage on the output pins is 6V, which is the absolute maximum rating. Operating the device above this voltage can cause damage or reduce its lifespan.
Use a shielded inductor, keep the layout compact, and use a common-mode choke to reduce EMI. Additionally, ensure that the device is placed away from sensitive analog circuits.
A low-ESR ceramic capacitor with a value of 10uF to 22uF is recommended. The capacitor should be placed close to the device's input pins to reduce noise and ripple.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
NCL30161MNTXG Overview
Use the download button to access the NCL30161MNTXG 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like NCL30,
or try a keyword search, such as Display Drivers
