The NCP1070STAT3G can handle input voltages up to 18V, but it's recommended to operate within the specified input voltage range of 7V to 15V for optimal performance and reliability.
To ensure stability, make sure to follow the recommended PCB layout guidelines, use a sufficient output capacitor (at least 10uF), and add a 1uF capacitor between the VIN and GND pins. Additionally, ensure that the input voltage is within the specified range and the output current is within the recommended limits.
The NCP1070STAT3G can provide up to 1A of output current, but it's recommended to operate within the specified output current range of 0.5A to 0.8A for optimal performance and reliability.
The output voltage of the NCP1070STAT3G can be adjusted by using a resistive divider network between the VOUT and ADJ pins. The output voltage can be calculated using the formula: VOUT = 1.25V x (1 + R1/R2), where R1 and R2 are the resistors in the divider network.
The EN (Enable) pin is used to enable or disable the regulator. When the EN pin is pulled high (above 2V), the regulator is enabled, and when it's pulled low (below 0.8V), the regulator is disabled. This pin can be used to implement power sequencing or to turn off the regulator when not in use.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
NCP1070STAT3G Overview
Use the download button to access the NCP1070STAT3G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like NCP10,
or try a keyword search, such as Switching Regulator or Controllers
