The recommended PCB layout for optimal thermal performance involves placing the device on a thermal pad connected to a large copper area on the PCB, and ensuring good airflow around the device. A 4-layer PCB with a solid ground plane and a thermal relief pattern around the thermal pad is also recommended.
To ensure reliable start-up of the converter, make sure to follow the recommended start-up sequence, provide a stable input voltage, and ensure that the input voltage is within the specified range. Also, ensure that the output capacitor is properly sized and has a low ESR to prevent voltage overshoot during start-up.
The maximum allowed output voltage deviation during transient events is typically ±10% of the nominal output voltage. However, this can vary depending on the specific application requirements and should be verified through simulation and testing.
To optimize the compensation network, use the provided compensation calculator tool or consult the application note for guidance. The compensation network should be optimized based on the specific output capacitor, inductor, and load characteristics of your application.
The recommended input capacitor type is a low-ESR ceramic capacitor with a value of 10uF to 22uF. The input capacitor should be placed close to the device and have a low inductance path to the input pins.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
NCP134AMX110TCG Overview
Use the download button to access the NCP134AMX110TCG 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like NCP13,
or try a keyword search, such as Linear Regulator ICs
