The recommended input capacitor value is 1uF to 10uF, depending on the input voltage and output current requirements. A larger capacitor value can help to reduce input voltage ripple and improve output voltage regulation.
To ensure the NCP1400ASN33T1G operates within its SOA, ensure that the input voltage, output current, and ambient temperature are within the recommended operating conditions specified in the datasheet. Additionally, ensure that the device is properly heatsinked and that the thermal design is adequate to prevent overheating.
The maximum output current that the NCP1400ASN33T1G can deliver is 300mA. However, the actual output current may be limited by the input voltage, output voltage, and thermal design of the application.
The output voltage of the NCP1400ASN33T1G can be adjusted by using a resistive divider network between the output pin and the ground pin. The output voltage can be calculated using the formula: Vout = 1.235 x (R1 / R2 + 1), where R1 and R2 are the resistors in the divider network.
The EN (enable) pin is used to enable or disable the output of the NCP1400ASN33T1G. When the EN pin is pulled high, the output is enabled, and when it is pulled low, the output is disabled. This pin can be used to implement power sequencing or to turn off the output during shutdown or standby modes.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
NCP1400ASN33T1G Overview
Use the download button to access the NCP1400ASN33T1G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like NCP14,
or try a keyword search, such as Switching Regulator or Controllers
