Part Image

NCP718BSN300T1G - onsemi

Description: Ultra−Low Quiescent Current typ. 4 µA over Temperature; Operating Input Voltage Range 2.5 V to 24 V; Adjustable and Fixed Version Available; High PSRR 60dB at 1kHz; Noise typ. 36 µVRMS from 100 Hz to 100 kHz; Stable with 1 µF output capacitor; Soft−start to Reduce Inrush Current and Overshoots; SOA Limiting for High Vin / High Iout – Static and Dynamic

Download NCP718BSN300T1G Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
NCP718BSN300T1G - onsemi PCB footprint - SOT23 (5-Pin) - SOT23 (5-Pin) - NCP718BSN300T1G
click to zoom
3D Models
NCP718BSN300T1G - onsemi  - 3D model - SOT23 (5-Pin) - NCP718BSN300T1G
click to zoom

NCP718BSN300T1G Details

  • Manufacturer Part Number:

    NCP718BSN300T1G

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    TSOT-23-5

  • Manufacturer Package Code:

    419AE

  • Country Of Origin:

    Thailand

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    10 Weeks

  • Manufacturer:

    onsemi

  • YTEOL:

    7.3

  • Adjustability:

    FIXED

  • Dropout Voltage1-Max:

    0.465 V

  • Dropout Voltage1-Nom:

    0.295 V

  • Input Voltage Absolute-Max:

    24 V

  • Input Voltage-Max:

    24 V

  • Input Voltage-Min:

    2.5 V

  • JESD-30 Code:

    R-PDSO-G5

  • Length:

    2.9 mm

  • Line Regulation-Max:

    0.01%

  • Load Regulation-Max:

    0.01%

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Outputs:

    1

  • Number of Terminals:

    5

  • Operating Temperature TJ-Max:

    125 °C

  • Operating Temperature TJ-Min:

    -40 °C

  • Output Current1-Max:

    0.3 A

  • Output Voltage1-Max:

    3.06 V

  • Output Voltage1-Min:

    2.94 V

  • Output Voltage1-Nom:

    3 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    VSSOP

  • Package Equivalence Code:

    TSOP5/6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Regulator Type:

    FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR

  • Screening Level:

    AEC-Q100

  • Seated Height-Max:

    1 mm

  • Surface Mount:

    YES

  • Terminal Finish:

    Nickel/Gold/Palladium (Ni/Au/Pd)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Voltage Tolerance-Max:

    2%

  • Width:

    1.6 mm

NCP718BSN300T1G Frequently Asked Questions (FAQs)

  • A thermal pad is recommended under the package to improve heat dissipation. A minimum of 2oz copper thickness and a thermal relief pattern are recommended. Refer to the onsemi application note AND9176/D for more details.
  • The device requires a stable input voltage (VIN) and a proper biasing of the enable pin (EN). Ensure VIN is within the recommended range (4.5V to 18V) and EN is driven high (above 2.5V) to enable the device.
  • The maximum allowed current through the output capacitor is dependent on the capacitor's ESR and the output voltage. As a general guideline, ensure the RMS current through the capacitor is below 1A to prevent overheating and reduce the risk of capacitor failure.
  • Check the input voltage (VIN) and ensure it is within the recommended range. Verify the enable pin (EN) is driven high. Check for any short circuits or overload conditions on the output. If issues persist, consult the onsemi application note AND9176/D for troubleshooting guidelines.
  • A low-ESR ceramic capacitor (X5R or X7R dielectric) with a value of 10uF to 22uF is recommended for the input capacitor. This helps to filter out noise and ensure stable operation.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

NCP718BSN300T1G Overview

Use the download button to access the NCP718BSN300T1G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like NCP71, or try a keyword search, such as Linear Regulator ICs

Parts related to NCP718BSN300T1G

Showing 0 results