Part Image

NCP81560MNTXG - onsemi

Description: Programmable Adaptive Voltage Positioning (AVP); Digitally Stabilized Switching Frequency; High Impedance Differential Output Voltage Amplifier; Differential Current Sense Amplifiers for Each Phase

Download NCP81560MNTXG Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
NCP81560MNTXG - onsemi PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - NCP81560MNTXG
click to zoom
3D Models
NCP81560MNTXG - onsemi  - 3D model - Quad Flat No-Lead - NCP81560MNTXG
click to zoom

NCP81560MNTXG Details

  • Manufacturer Part Number:

    NCP81560MNTXG

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    QFN-52

  • Package Description:

    QFN-52

  • Manufacturer Package Code:

    485BE

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    15 Weeks

  • Manufacturer:

    onsemi

  • Analog IC - Other Type:

    SWITCHING CONTROLLER

  • Control Mode:

    CURRENT-MODE

  • Control Technique:

    PULSE WIDTH MODULATION

  • Input Voltage-Max:

    21 V

  • Input Voltage-Min:

    4.5 V

  • JESD-30 Code:

    S-XQCC-N52

  • JESD-609 Code:

    e3

  • Length:

    6 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    52

  • Operating Temperature-Max:

    100 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    VQCCN

  • Package Equivalence Code:

    LCC52,.24SQ,16

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Screening Level:

    AEC-Q100

  • Seated Height-Max:

    1 mm

  • Surface Mount:

    YES

  • Switcher Configuration:

    BUCK

  • Switching Frequency-Max:

    1170 kHz

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.4 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    6 mm

NCP81560MNTXG Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and thermal vias is recommended. The device should be placed near a thermal pad or heat sink to dissipate heat efficiently.
  • Ensure that the input voltage rises and falls monotonically, and that the enable pin is properly driven to prevent unwanted start-up or shutdown. A soft-start circuit can also be used to reduce inrush current.
  • The maximum allowed input voltage ripple is 10% of the nominal input voltage. Exceeding this limit may affect the device's performance and reliability.
  • Yes, but the device's performance and reliability may be affected above 125°C. Ensure that the device is properly cooled and that the junction temperature is within the recommended range.
  • Check the input voltage, output load, and feedback loop components. Ensure that the feedback resistors are properly selected and that the output voltage is within the recommended range.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

NCP81560MNTXG Overview

Use the download button to access the NCP81560MNTXG schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like NCP81, or try a keyword search, such as Switching Regulator or Controllers

Parts related to NCP81560MNTXG

Showing 0 results