Please enter a minimum 3 letters or numbers
Technical Content
Part Image

NCS2252SQ2T2G - onsemi

Description: Propagation delay: 50 ns with 100 mV overdrive; Rail-to-rail input: VSS -200 mV to VDD +200 mV; Supply voltage: 1.8 V to 5.5 V; Supply current: 150 μA typical at 5 V supply; Open drain output; Packages: SC-70 and SOT23-5; AEC−Q100 qualified and PPAP capable options available

Download NCS2252SQ2T2G Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
NCS2252SQ2T2G - onsemi - PCB symbol
click to zoom
PCB Footprints
NCS2252SQ2T2G - onsemi PCB footprint - SOT23 (5-Pin) - SOT23 (5-Pin) - SC−88A (SC−70−5/SOT−353
click to zoom
3D Models
NCS2252SQ2T2G - onsemi - 3D model - SOT23 (5-Pin) - SC−88A (SC−70−5/SOT−353
click to zoom

NCS2252SQ2T2G Details

  • Manufacturer Part Number:

    NCS2252SQ2T2G

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SC-88A / SC-70-5

  • Manufacturer Package Code:

    419A-02

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    10 Weeks

  • Date Of Intro:

    2018-05-11

  • Manufacturer:

    onsemi

  • YTEOL:

    5.8

  • Amplifier Type:

    COMPARATOR

  • Average Bias Current-Max (IIB):

    0.001 µA

  • Input Offset Voltage-Max:

    6000 µV

  • JESD-30 Code:

    R-PDSO-G5

  • JESD-609 Code:

    e3

  • Length:

    2 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    5

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Type:

    OPEN-DRAIN

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP5/6,.08

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Response Time-Nom:

    90 ns

  • Seated Height-Max:

    1.1 mm

  • Supply Current-Max:

    0.25 mA

  • Supply Voltage Limit-Max:

    6 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    1.25 mm

NCS2252SQ2T2G Frequently Asked Questions (FAQs)

  • A good PCB layout for the NCS2252SQ2T2G involves keeping the input and output traces as short as possible, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a dedicated ground plane is recommended.
  • To ensure proper biasing, connect the VCC pin to a stable voltage source, and decouple it with a 10uF capacitor to ground. The VBIAS pin should be connected to a voltage divider network that sets the desired output voltage. The EN pin should be tied to a logic high or low depending on the desired enable state.
  • The maximum output current of the NCS2252SQ2T2G is 2A. However, the device can deliver higher currents for short durations. It's essential to ensure the device is properly heatsinked and the output current is within the recommended operating range to prevent overheating.
  • To protect the NCS2252SQ2T2G from overvoltage and undervoltage conditions, use a voltage supervisor or a power-on reset circuit to monitor the input voltage and reset the device if it falls outside the recommended operating range. Additionally, consider using a TVS diode or a zener diode to clamp the input voltage.
  • The thermal resistance of the NCS2252SQ2T2G is typically around 25°C/W. However, this value can vary depending on the PCB layout, airflow, and other environmental factors. It's essential to ensure proper heatsinking and thermal management to prevent overheating.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

NCS2252SQ2T2G Overview

Use the download button to access the NCS2252SQ2T2G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like NCS22, or try a keyword search, such as Comparators

Parts related to NCS2252SQ2T2G

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑