Description:Output Voltage Options:Adjustable, 1.5 V, 1.8 V, 2.5 V, 2.8 V, 3.0 V, 3.3 V, 3.5 V, 5.0 V; UltraLow Dropout Voltage of 150 mV at 150 mA; Adjustable Output by External Resistors from 5.0 V down to 1.250 V; Fast Enable Turnon Time of 15us; Excellent Line and Load Regulation; High Accuracy up to 1.5% Output Voltage Tolerance over AllOperating Conditions; Typical Noise Voltage of 50 uVrms without a Bypass Capacitor; Wide Supply Voltage Range Operating Range; NCV Prefix for Automotive and Other Applications Requ
The recommended PCB layout for optimal thermal performance involves placing the device on a 2-layer or 4-layer board with a solid ground plane, using thermal vias to connect the exposed pad to the ground plane, and keeping the copper traces as short and wide as possible to minimize thermal resistance.
To ensure reliable operation in high-temperature environments, it is recommended to follow the derating guidelines provided in the datasheet, use a heat sink or thermal interface material, and ensure good airflow around the device. Additionally, consider using a thermistor or temperature sensor to monitor the device temperature and take corrective action if necessary.
Using a different input capacitor value than recommended may affect the stability and performance of the device. A smaller capacitor value may result in increased noise and ripple, while a larger capacitor value may increase the startup time and reduce the overall efficiency. It is recommended to follow the recommended input capacitor value and type to ensure optimal performance.
To troubleshoot issues with the device not turning on or not regulating properly, check the input voltage, output voltage, and enable pin voltage using an oscilloscope or multimeter. Verify that the input voltage is within the recommended range, the output voltage is within the specified tolerance, and the enable pin is properly biased. Also, check for any signs of overheating, such as excessive temperature or thermal shutdown.
The NCV8560SN350T1G is designed to meet the EMI and EMC requirements of various industry standards. To minimize EMI and EMC issues, it is recommended to follow proper PCB layout and design practices, use shielding and filtering components as necessary, and ensure that the device is properly decoupled and bypassed. Additionally, consider using a common-mode choke or EMI filter at the input and output of the device.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
NCV8560SN350T1G Overview
Use the download button to access the NCV8560SN350T1G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like NCV85,
or try a keyword search, such as Linear Regulator ICs
