Description:Higher frame rates; IP-CDS global shutter technology; True HW scalable family concept; High configurability; Fast adaptability; Multiple windowing; High Dynamic Range
A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The device should be placed near the center of the board, and decoupling capacitors should be placed close to the device pins.
Ensure proper thermal management by providing adequate heat sinking and airflow. The device should be operated within the recommended temperature range, and thermal shutdown protection should be implemented to prevent overheating.
A 10uF to 22uF ceramic capacitor is recommended for input decoupling, placed as close to the device pins as possible.
Use an oscilloscope to monitor the output voltage and current. Check for proper PCB layout, decoupling, and thermal management. Verify that the input voltage and current are within the recommended specifications.
Yes, the output voltage can be adjusted by changing the feedback resistors. However, ensure that the output voltage is within the recommended range and that the device is operated within its specifications.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
NOIP2SN1300A-QTI Overview
Use the download button to access the NOIP2SN1300A-QTI 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like NOIP2,
or try a keyword search, such as Image Sensors
