NTCG064BF473FTBX - TDK

NTCG064BF473FTBX Frequently Asked Questions (FAQs)

• What is the recommended soldering temperature and time for the NTCG064BF473FTBX?
  The recommended soldering temperature is 260°C (500°F) and the recommended soldering time is 3-5 seconds. However, it's always best to follow the soldering guidelines provided by TDK Corporation or consult with their technical support team for specific guidance.
• How do I handle and store the NTCG064BF473FTBX to prevent damage?
  Handle the thermistor by the body, avoiding touching the leads or glass portion to prevent damage. Store the thermistor in a dry, cool place, away from direct sunlight and moisture. Avoid bending or flexing the leads excessively, as this can cause damage to the internal components.
• What is the thermal shock resistance of the NTCG064BF473FTBX?
  The NTCG064BF473FTBX has a high thermal shock resistance, with a rating of 300 cycles between -40°C and 150°C. This means it can withstand rapid temperature changes without compromising its performance or reliability.
• Can I use the NTCG064BF473FTBX in high-humidity or high-temperature applications?
  While the NTCG064BF473FTBX is designed to operate in a wide temperature range (-40°C to 150°C), it's not recommended for use in high-humidity environments (>80% RH) or extreme temperature applications (>150°C). Consult with TDK Corporation's technical support team for guidance on specific application requirements.
• What is the self-heating effect of the NTCG064BF473FTBX, and how does it affect accuracy?
  The self-heating effect of the NTCG064BF473FTBX is approximately 1-2°C/mW. This means that the thermistor's temperature reading may be affected by its own power consumption. To minimize the self-heating effect, use a low excitation current and ensure good thermal coupling to a heat sink or the application's thermal mass.