Part Image

OPA170AID - Texas Instruments

Description: 36V, microPower, Rail-to-Rail Output, General Purpose Op Amp in MicroPackages

Download OPA170AID Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
OPA170AID - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D(R-PDSO-G)
click to zoom
3D Models
OPA170AID - Texas Instruments  - 3D model - Small Outline Packages - D(R-PDSO-G)
click to zoom

OPA170AID Details

  • Manufacturer Part Number:

    OPA170AID

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Pin Count:

    8

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.0035 µA

  • Bias Current-Max (IIB) @25C:

    0.000015 µA

  • Common-mode Reject Ratio-Min:

    104 dB

  • Common-mode Reject Ratio-Nom:

    120 dB

  • Frequency Compensation:

    YES

  • Input Offset Current-Max (IIO):

    0.0035 µA

  • Input Offset Voltage-Max:

    1800 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    YES

  • Moisture Sensitivity Level:

    2

  • Neg Supply Voltage Limit-Max:

    -20 V

  • Neg Supply Voltage-Nom (Vsup):

    -18 V

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    BULK

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Nom:

    0.4 V/us

  • Supply Current-Max:

    0.145 mA

  • Supply Voltage Limit-Max:

    20 V

  • Supply Voltage-Nom (Vsup):

    18 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    1200

  • Voltage Gain-Min:

    316000

  • Wideband:

    NO

  • Width:

    3.9 mm

OPA170AID Frequently Asked Questions (FAQs)

  • The maximum power dissipation of the OPA170AID is 670mW, which is calculated based on the maximum junction temperature (TJ) of 150°C and the thermal resistance (θJA) of 125°C/W.
  • To ensure stability in a unity-gain configuration, it's recommended to add a capacitor (typically 10nF to 100nF) between the output and the inverting input to compensate for the op-amp's internal capacitance and ensure phase margin.
  • To minimize noise and EMI, it's recommended to keep the input and output traces short and away from each other, use a ground plane, and avoid running sensitive traces near the op-amp's power pins. Additionally, decoupling capacitors should be placed close to the op-amp's power pins.
  • The OPA170AID is specified to operate from -40°C to 125°C, but it's recommended to derate the maximum junction temperature (TJ) by 1°C for every 1W of power dissipation above 250mW. It's essential to ensure the device stays within its recommended operating conditions to maintain reliability and performance.
  • When selecting resistors for the feedback network, consider the op-amp's input impedance, output impedance, and desired gain. Choose resistors with low tolerance (1% or better) and temperature coefficients (TCR) to minimize gain errors and drift. Additionally, consider the resistor's power rating and voltage coefficient to ensure reliability.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

OPA170AID Overview

Use the download button to access the OPA170AID schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like OPA17, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to OPA170AID

Showing 0 results

OPA170AID Alternates

Showing results

Image Part Number Model
Part Image OPA171AID Texas Instruments

Operational Amplifier, 1 Func, 1800uV Offset-Max, BIPolar, PDSO8

Part Image OPA170AIDR Texas Instruments

Operational Amplifier, 1 Func, 1800uV Offset-Max, BIPolar, PDSO8

Part Image OPA171AIDR Texas Instruments

Operational Amplifier, 1 Func, 1800uV Offset-Max, BIPolar, PDSO8