Part Image

OPA2132UG4 - Texas Instruments

Description: High Speed Operational Amplifiers High Speed FET-Input Op Amp

Download OPA2132UG4 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
OPA2132UG4 - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D
click to zoom
3D Models
OPA2132UG4 - Texas Instruments  - 3D model - Small Outline Packages - D
click to zoom

OPA2132UG4 Details

  • Manufacturer Part Number:

    OPA2132UG4

  • Brand Name:

    Texas Instruments

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOIC

  • Package Description:

    GREEN, PLASTIC, MS-012AA, SOIC-8

  • Pin Count:

    8

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.00005 µA

  • Bias Current-Max (IIB) @25C:

    0.00005 µA

  • Common-mode Reject Ratio-Min:

    96 dB

  • Common-mode Reject Ratio-Nom:

    100 dB

  • Frequency Compensation:

    YES

  • Input Offset Current-Max (IIO):

    0.00005 µA

  • Input Offset Voltage-Max:

    500 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    YES

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    3

  • Neg Supply Voltage Limit-Max:

    -18 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Functions:

    2

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TUBE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Nom:

    20 V/us

  • Subcategory:

    Operational Amplifier

  • Supply Current-Max:

    9.6 mA

  • Supply Voltage Limit-Max:

    18 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    NOT SPECIFIED

  • Unity Gain BW-Nom:

    8000

  • Voltage Gain-Min:

    316000

  • Wideband:

    NO

  • Width:

    3.9 mm

OPA2132UG4 Frequently Asked Questions (FAQs)

  • TI recommends using a 10uF ceramic capacitor in parallel with a 100nF ceramic capacitor, placed as close as possible to the power supply pins, to ensure stable operation and minimize noise.
  • Yes, the OPA2132UG4 can be used as a unity gain buffer, but it's not the most ideal configuration due to its relatively high input bias current. A better option would be to use a FET-input op-amp like the OPA827 or OPA847.
  • TI recommends following good PCB layout practices, such as separating analog and digital grounds, using a solid ground plane, and keeping sensitive analog signals away from noisy digital signals. Additionally, place the op-amp close to the signal source and use short, direct traces to minimize noise pickup.
  • The OPA2132UG4 can drive capacitive loads up to 1nF without oscillation, but it's recommended to use a series resistor (Rs) to dampen the load and prevent oscillation. The value of Rs depends on the load capacitance and the desired frequency response.
  • The OPA2132UG4 is rated for operation up to 125°C, but its performance may degrade at high temperatures. It's recommended to derate the device's specifications and consider using a more temperature-stable op-amp, such as the OPA1632, for high-temperature applications.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

OPA2132UG4 Overview

Use the download button to access the OPA2132UG4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like OPA21, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to OPA2132UG4

Showing 0 results

OPA2132UG4 Alternates

Showing results

Image Part Number Model
Part Image OPA2132U/2K5 Texas Instruments

Operational Amplifier, 2 Func, 500uV Offset-Max, BIPolar, PDSO8

Part Image OPA2132U Texas Instruments

Operational Amplifier, 2 Func, 500uV Offset-Max, BIPolar, PDSO8

Part Image OPA2132UE4 Texas Instruments

Operational Amplifier, 2 Func, 500uV Offset-Max, BICMOS, PDSO8

Part Image OPA2132U/2K5E4 Texas Instruments

Operational Amplifier, 2 Func, 500uV Offset-Max, BICMOS, PDSO8

Part Image OPA2132U/2K5G4 Texas Instruments

Operational Amplifier, 2 Func, 500uV Offset-Max, BICMOS, PDSO8

For a full list of alternate parts for OPA2132UG4, check out Findchips.com