Part Image

OPA2140AIDRGR - Texas Instruments

Description: Precision Amplifiers Dual-channel, 11-MHz, low-noise 36-V JFET precision operational amplifier with rail-to-rail output 8-SON -40 to 125

Download OPA2140AIDRGR Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
OPA2140AIDRGR - Texas Instruments  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

OPA2140AIDRGR Details

  • Manufacturer Part Number:

    OPA2140AIDRGR

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.003 µA

  • Bias Current-Max (IIB) @25C:

    0.00001 µA

  • Common-mode Reject Ratio-Min:

    126 dB

  • Common-mode Reject Ratio-Nom:

    140 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    120 µV

  • JESD-30 Code:

    S-PDSO-N8

  • JESD-609 Code:

    e4

  • Length:

    3 mm

  • Low-Bias:

    YES

  • Low-Offset:

    YES

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -20 V

  • Neg Supply Voltage-Nom (Vsup):

    -18 V

  • Number of Functions:

    2

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVSON

  • Package Equivalence Code:

    SOLCC8,.12,20

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE

  • Packing Method:

    TR, 13 INCH

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Seated Height-Max:

    0.8 mm

  • Slew Rate-Nom:

    20 V/us

  • Supply Current-Max:

    5.4 mA

  • Supply Voltage Limit-Max:

    20 V

  • Supply Voltage-Nom (Vsup):

    18 V

  • Surface Mount:

    YES

  • Technology:

    JFET

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    11000

  • Voltage Gain-Min:

    501187.2336

  • Wideband:

    NO

  • Width:

    3 mm

OPA2140AIDRGR Frequently Asked Questions (FAQs)

  • Texas Instruments recommends a layout that minimizes parasitic capacitance and inductance, keeps the input and output traces short and separate, and uses a solid ground plane to reduce noise and electromagnetic interference (EMI). A 4-layer PCB with a dedicated analog ground plane is recommended.
  • To ensure stability, it's essential to follow the recommended compensation capacitor values and placement, as specified in the datasheet. Additionally, the gain resistors should be chosen to minimize phase shift and ensure a stable phase margin. A general rule of thumb is to keep the gain resistors below 1 kΩ.
  • The maximum power dissipation of OPA2140AIDRGR is dependent on the ambient temperature and the package type. For the DGR package, the maximum power dissipation is approximately 1.4 W at 25°C. To calculate the power dissipation, use the formula: Pd = (Vcc x Icc) + (Vout x Iout), where Vcc is the supply voltage, Icc is the quiescent current, Vout is the output voltage, and Iout is the output current.
  • Yes, OPA2140AIDRGR is specified to operate from -40°C to 125°C. However, the device's performance and reliability may degrade at higher temperatures. It's essential to follow the recommended operating conditions and derate the power dissipation accordingly to ensure reliable operation.
  • To protect OPA2140AIDRGR from EMI, use a combination of layout techniques, such as keeping the input and output traces short and separate, using a solid ground plane, and adding bypass capacitors to the power supply pins. Additionally, consider using EMI filters or shielding to reduce radiated emissions.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

OPA2140AIDRGR Overview

Use the download button to access the OPA2140AIDRGR 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like OPA21, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to OPA2140AIDRGR

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview

OPA2140AIDRGR Alternates

Showing results

Image Part Number Model
Part Image OPA2140AIDRGT Texas Instruments

Operational Amplifier, 2 Func, 120uV Offset-Max, JFET, PDSO8