Part Image

OPA336NJ/250 - Texas Instruments

Description: Texas Instruments OPA336NJ/250 Op Amp, 0.1MHz CMOS, Rail to Rail, 3 V, 5 V, 5-Pin SOT-23

Download OPA336NJ/250 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
OPA336NJ/250 - Texas Instruments PCB footprint - SOT23 (5-Pin) - SOT23 (5-Pin) - DBV0005A
click to zoom
3D Models
OPA336NJ/250 - Texas Instruments  - 3D model - SOT23 (5-Pin) - DBV0005A
click to zoom

OPA336NJ/250 Details

  • Manufacturer Part Number:

    OPA336NJ/250

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    End Of Life

  • Part Package Code:

    SOT-23

  • Pin Count:

    5

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    1

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.00006 µA

  • Bias Current-Max (IIB) @25C:

    0.00001 µA

  • Common-mode Reject Ratio-Min:

    80 dB

  • Common-mode Reject Ratio-Nom:

    90 dB

  • Frequency Compensation:

    YES

  • Input Offset Current-Max (IIO):

    0.00001 µA

  • Input Offset Voltage-Max:

    125 µV

  • JESD-30 Code:

    R-PDSO-G5

  • JESD-609 Code:

    e4

  • Length:

    2.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    YES

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    5

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Equivalence Code:

    TSOP5/6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.45 mm

  • Slew Rate-Min:

    0.03 V/us

  • Slew Rate-Nom:

    0.03 V/us

  • Supply Current-Max:

    0.032 mA

  • Supply Voltage Limit-Max:

    7.5 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    100

  • Voltage Gain-Min:

    31620

  • Wideband:

    NO

  • Width:

    1.6 mm

OPA336NJ/250 Frequently Asked Questions (FAQs)

  • A good PCB layout for the OPA336NJ/250 involves keeping the input and output traces short and away from noise sources, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated analog ground plane is recommended.
  • To ensure stability, ensure that the gain resistors are properly matched, and the feedback capacitor is properly sized. A good rule of thumb is to use a feedback capacitor that is at least 10 times the value of the input capacitor. Additionally, ensure that the op-amp is not operated at a gain greater than 100.
  • The maximum power dissipation of the OPA336NJ/250 is 670mW. However, this can be limited by the thermal resistance of the package and the PCB. It's essential to ensure good thermal design and heat sinking to prevent overheating.
  • The OPA336NJ/250 is rated for operation from -40°C to 125°C. However, the device's performance may degrade at high temperatures. It's essential to consider the device's thermal characteristics and ensure proper heat sinking and thermal design to prevent overheating.
  • To protect the OPA336NJ/250 from EMI, use a shielded enclosure, keep the device away from noise sources, and use a common-mode choke or ferrite bead on the input lines. Additionally, ensure that the PCB layout is designed to minimize radiation and susceptibility to EMI.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

OPA336NJ/250 Overview

Use the download button to access the OPA336NJ/250 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like OPA33, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to OPA336NJ/250

Showing 0 results

OPA336NJ/250 Alternates

Showing results

Image Part Number Model
Part Image OPA336NJ/3K Texas Instruments

Operational Amplifier, 1 Func, 125uV Offset-Max, CMOS, PDSO5

Part Image OPA336UJ Rochester Electronics LLC

OP-AMP, 2500uV OFFSET-MAX, 0.1MHz BAND WIDTH, PDSO8, GREEN, PLASTIC, SOIC-8

Part Image OPA336NJ/250 Rochester Electronics LLC

OP-AMP, 2500uV OFFSET-MAX, 0.1MHz BAND WIDTH, PDSO5, GREEN, PLASTIC, SOT-23, 5 PIN

Part Image OPA336NJ/3KG4 Texas Instruments

Operational Amplifier, 1 Func, 2500uV Offset-Max, CMOS, PDSO5

Part Image OPA336NJ/250G4 Texas Instruments

Operational Amplifier, 1 Func, 125uV Offset-Max, CMOS, PDSO5

For a full list of alternate parts for OPA336NJ/250, check out Findchips.com