Part Image

OPA4347UA - Texas Instruments

Description: Micropower Rail-To-Rail Operational Amplifier

Download OPA4347UA Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
OPA4347UA - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D(r-pdso-g14)//2021
click to zoom
3D Models
OPA4347UA - Texas Instruments  - 3D model - Small Outline Packages - D(r-pdso-g14)//2021
click to zoom

OPA4347UA Details

  • Manufacturer Part Number:

    OPA4347UA

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    End Of Life

  • Part Package Code:

    SOIC

  • Pin Count:

    14

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    1

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.00001 µA

  • Bias Current-Max (IIB) @25C:

    0.00001 µA

  • Common-mode Reject Ratio-Min:

    70 dB

  • Common-mode Reject Ratio-Nom:

    80 dB

  • Frequency Compensation:

    YES

  • Input Offset Current-Max (IIO):

    0.00001 µA

  • Input Offset Voltage-Max:

    6000 µV

  • JESD-30 Code:

    R-PDSO-G14

  • JESD-609 Code:

    e4

  • Length:

    8.65 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    YES

  • Moisture Sensitivity Level:

    2

  • Number of Functions:

    4

  • Number of Terminals:

    14

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -55 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP14,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TUBE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Nom:

    0.17 V/us

  • Supply Current-Max:

    0.152 mA

  • Supply Voltage Limit-Max:

    7.5 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    MILITARY

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    350

  • Voltage Gain-Min:

    25100

  • Wideband:

    NO

  • Width:

    3.9 mm

OPA4347UA Frequently Asked Questions (FAQs)

  • A good PCB layout for OPA4347UA involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated analog ground plane is recommended.
  • The choice of gain resistors depends on the desired gain, bandwidth, and noise requirements. A good starting point is to use the gain resistor values recommended in the datasheet. For custom gains, use the gain equation provided in the datasheet and consider the trade-offs between gain, bandwidth, and noise.
  • The maximum power dissipation of OPA4347UA is 670mW. However, this can be limited by the thermal resistance of the package and the PCB. Ensure good thermal design and heat sinking to prevent overheating.
  • Yes, OPA4347UA can be used in single-supply applications. However, the input common-mode range is limited to VCC-1.5V, so ensure that the input signal is within this range. Additionally, consider using a voltage divider or level-shifting circuit to adjust the input signal to the desired range.
  • Use a combination of passive and active filtering techniques to reduce noise and oscillations. Add decoupling capacitors, use a low-pass filter at the input, and consider adding a noise-reducing capacitor across the feedback resistors. Ensure that the PCB layout is well-designed to minimize noise coupling.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

OPA4347UA Overview

Use the download button to access the OPA4347UA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like OPA43, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to OPA4347UA

Showing 0 results

OPA4347UA Alternates

Showing results

Image Part Number Model
Part Image OPA4347UA/2K5G4 Texas Instruments

Operational Amplifier, 4 Func, 7000uV Offset-Max, CMOS, PDSO14