Please enter a minimum 3 letters or numbers
Technical Content
Part Image

OPA4992IPWR - Texas Instruments

Description: • Low offset voltage: ±210µV • Low offset voltage drift: ±0.25µV/°C • Low noise: 7nV/√Hz at 1kHz, 4.4nV/√Hz broadband • High common-mode rejection: 115dB • Low bias current: ±10pA • Rail-to-rail input and output • MUX-friendly/comparator inputs – Amplifier operates with differential inputs up to supply rail – Amplifier can be used in open-loop or as comparator • Wide bandwidth: 10.6MHz GBW, unity-gain stable • High slew rate: 32V/µs • Low quiescent current: 2.4mA per amplifier • Wide supply:

Download OPA4992IPWR Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
OPA4992IPWR - Texas Instruments - PCB symbol
click to zoom
PCB Footprints
OPA4992IPWR - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - OPA4992IPWR
click to zoom
3D Models
OPA4992IPWR - Texas Instruments - 3D model - Small Outline Packages - OPA4992IPWR
click to zoom

OPA4992IPWR Details

  • Manufacturer Part Number:

    OPA4992IPWR

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Common-mode Reject Ratio-Min:

    75 dB

  • Common-mode Reject Ratio-Nom:

    115 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    1000 µV

  • JESD-30 Code:

    R-PDSO-G14

  • JESD-609 Code:

    e4

  • Length:

    5 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    4

  • Number of Terminals:

    14

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP14,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Packing Method:

    TR, 13 INCH

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Seated Height-Max:

    1.2 mm

  • Slew Rate-Nom:

    32 V/us

  • Supply Current-Max:

    11.36 mA

  • Supply Voltage Limit-Max:

    42 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    10600

  • Voltage Gain-Min:

    158489.3192

  • Wideband:

    NO

  • Width:

    4.4 mm

OPA4992IPWR Frequently Asked Questions (FAQs)

  • Texas Instruments provides a recommended PCB layout in the OPA4992 datasheet, which includes guidelines for component placement, trace routing, and grounding. Additionally, TI recommends using a 4-layer PCB with a solid ground plane and a separate analog ground plane to minimize noise and interference.
  • The OPA4992IPWR has a thermal pad that must be connected to a thermal relief pattern on the PCB to ensure proper heat dissipation. TI recommends using a thermal relief pattern with multiple vias to the ground plane to dissipate heat efficiently. Additionally, the device should be mounted on a heat sink or a metal core PCB to further improve thermal dissipation.
  • The OPA4992IPWR can drive capacitive loads up to 1nF, but TI recommends limiting the capacitive load to 470pF or less to ensure stability and prevent oscillations. If a larger capacitive load is required, an isolation resistor or a series resistor-capacitor network can be used to improve stability.
  • TI recommends using external protection devices such as TVS diodes or ESD protection devices to protect the OPA4992IPWR from overvoltage and ESD events. Additionally, the device should be powered up and down slowly to prevent voltage spikes and transients.
  • TI recommends using a low-pass filter at the input and output of the OPA4992IPWR to filter out high-frequency noise and prevent aliasing. A simple RC filter with a cutoff frequency of 100kHz to 1MHz is sufficient for most applications.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

OPA4992IPWR Overview

Use the download button to access the OPA4992IPWR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like OPA49, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to OPA4992IPWR

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑