Part Image

OPA725AIDR - Texas Instruments

Description: Operational Amplifiers - Op Amps Very Low-Noise High Speed 12V CMOS

Download OPA725AIDR Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
OPA725AIDR - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D0008A_02021
click to zoom
3D Models
OPA725AIDR - Texas Instruments  - 3D model - Small Outline Packages - D0008A_02021
click to zoom

OPA725AIDR Details

  • Manufacturer Part Number:

    OPA725AIDR

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Pin Count:

    8

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.0002 µA

  • Bias Current-Max (IIB) @25C:

    0.0002 µA

  • Common-mode Reject Ratio-Min:

    88 dB

  • Common-mode Reject Ratio-Nom:

    94 dB

  • Frequency Compensation:

    YES

  • Input Offset Current-Max (IIO):

    0.00005 µA

  • Input Offset Voltage-Max:

    3000 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    2

  • Neg Supply Voltage Limit-Max:

    -6.6 V

  • Neg Supply Voltage-Nom (Vsup):

    -6 V

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Nom:

    30 V/us

  • Supply Current-Max:

    5.5 mA

  • Supply Voltage Limit-Max:

    6.6 V

  • Supply Voltage-Nom (Vsup):

    6 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    20000

  • Voltage Gain-Min:

    63100

  • Wideband:

    NO

  • Width:

    3.9 mm

OPA725AIDR Frequently Asked Questions (FAQs)

  • Texas Instruments recommends a 4-layer PCB with a solid ground plane, and to keep the input and output traces as short as possible. Additionally, it's recommended to use a common-mode choke or ferrite bead to filter out high-frequency noise.
  • To ensure stability, it's recommended to use a compensation capacitor (Cc) between the output and the inverting input pins. The value of Cc depends on the gain and bandwidth requirements, but a typical value is around 10-22pF. Additionally, it's recommended to use a low-ESR capacitor for the power supply decoupling.
  • The maximum power dissipation of OPA725AIDR is dependent on the ambient temperature and the package type. For the SOIC package, the maximum power dissipation is around 1.4W at 25°C ambient temperature. It's recommended to use a heat sink or to ensure good airflow to keep the junction temperature below 150°C.
  • Yes, OPA725AIDR is specified to operate from -40°C to 125°C. However, the device's performance and reliability may degrade at high temperatures. It's recommended to derate the power dissipation and to ensure good thermal management to prevent overheating.
  • Texas Instruments recommends using ESD protection devices such as TVS diodes or ESD arrays at the input and output pins. Additionally, it's recommended to handle the device by the body or use an anti-static wrist strap to prevent static discharge.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

OPA725AIDR Overview

Use the download button to access the OPA725AIDR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like OPA72, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to OPA725AIDR

Showing 0 results

OPA725AIDR Alternates

Showing results

Image Part Number Model
Part Image OPA725AIDRG4 Texas Instruments

Operational Amplifier, 1 Func, 3000uV Offset-Max, CMOS, PDSO8