Please enter a minimum 3 letters or numbers
Technical Content
Part Image

P3213-AL - COILCRAFT

Description: Single Phase EMI Filter 100-300 kHz 1.3Amp 62µH 0.15Ohms Standard Series

Download P3213-AL Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
P3213-AL - COILCRAFT - PCB symbol
click to zoom
PCB Footprints
P3213-AL - COILCRAFT PCB footprint - Other - Other - P3213-AL-1
click to zoom
3D Models
P3213-AL - COILCRAFT - 3D model - Other - P3213-AL-1
click to zoom

P3213-AL Details

  • Manufacturer Part Number:

    P3213-AL

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    ROHS COMPLIANT PACKAGE-4

  • Manufacturer:

    Coilcraft Inc

  • YTEOL:

    7

  • Approvals:

    UL

  • Filter Type:

    SINGLE PHASE EMI FILTER

  • Height:

    31.2 mm

  • JESD-609 Code:

    e2

  • Length:

    31.8 mm

  • Mounting Type:

    THROUGH HOLE MOUNT

  • Number of Terminals:

    4

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Rated Current:

    1.3 A

  • Terminal Finish:

    Tin/Silver (Sn/Ag)

  • Width:

    15.88 mm

P3213-AL Frequently Asked Questions (FAQs)

  • Coilcraft recommends a land pattern with a pad size of 3.3 mm x 2.5 mm, with a non-solder mask defined (NSMD) pad and a 0.5 mm gap between pads. Refer to Coilcraft's application note AN-113 for more details.
  • The P3213-AL is rated for operation up to 125°C, but derating is required above 85°C. Consult Coilcraft's temperature derating chart to determine the maximum current rating at your operating temperature.
  • The P3213-AL has a shielded construction, but it's still important to follow proper PCB layout and spacing guidelines to minimize magnetic interference. Keep the inductor at least 2 mm away from other components and avoid routing sensitive signals nearby.
  • The SRF of the P3213-AL is approximately 250 MHz, but this can vary depending on the specific application and PCB layout. It's essential to consider the SRF when designing your circuit to avoid unwanted resonances.
  • Yes, the P3213-AL is suitable for high-current switching regulators, but you must ensure that the inductor's current rating and saturation characteristics meet your application's requirements. Consult Coilcraft's application notes and simulation tools to verify the inductor's performance.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

P3213-AL Overview

Use the download button to access the P3213-AL schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like P3213, or try a keyword search, such as Mains Filters

About COILCRAFT

Colicraft designs and manufactures high performing magnectic components, RF chip inductors, power magnectics, and filters. Coilcraft has engineering, manufacturing, and distribution facilities in North America, Asia, and Europe.

Parts related to P3213-AL

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑