ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended, and the thermal pad should be connected to a ground plane to reduce thermal resistance.
To ensure reliable operation in high-temperature environments, it's essential to follow the recommended derating curves for voltage and current. Additionally, consider using a heat sink or thermal interface material to reduce the junction temperature. ROHM also recommends using a thermistor or temperature sensor to monitor the device temperature.
While the datasheet specifies a maximum voltage rating of 20V, ROHM recommends not exceeding 18V to ensure reliable operation and to prevent damage from voltage spikes or transients.
Yes, the PDZVTR20B can be used in switching regulator applications. However, it's essential to ensure that the device is operated within its safe operating area (SOA) and that the switching frequency is within the recommended range. ROHM recommends using a gate driver with a low output impedance to minimize switching losses.
ROHM recommends using ESD protection devices, such as TVS diodes or ESD arrays, to protect the PDZVTR20B from electrostatic discharge. It's also essential to follow proper handling and storage procedures to prevent ESD damage.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
PDZVTR20B Overview
Use the download button to access the PDZVTR20B schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like PDZVT,
or try a keyword search, such as Zener Diodes
