Pasternack recommends a 4-layer PCB with a solid ground plane, and a low-impedance path to ground for the RF ground pins. A good rule of thumb is to keep the RF signal path as short as possible and use a via to connect the RF ground pins to the ground plane.
The PE4249 requires a positive bias voltage (Vdd) of 5V ± 0.5V and a negative bias voltage (Vgg) of -5V ± 0.5V. Ensure that the bias voltages are well-regulated and decoupled to prevent noise and oscillations.
The PE4249 can handle up to 1W of RF input power. Exceeding this limit may cause damage to the device or affect its performance.
Common issues can be caused by improper biasing, poor PCB layout, or incorrect termination. Check the bias voltages, PCB layout, and termination resistors. Also, ensure that the device is properly soldered and there are no cold solder joints.
The PE4249 is a commercial-grade device, but Pasternack offers a military-grade version, the PE4249M, which is designed to meet the requirements of MIL-PRF-38534. Contact Pasternack for more information on the military-grade version.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
PE4249 Overview
Use the download button to access the PE4249 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like PE424,
or try a keyword search, such as RF SMC/SSMC Connectors
