A good PCB layout for the PI3WVR2646GHEX should consider the following: keep the input and output traces short and symmetrical, use a solid ground plane, and place decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
To ensure reliable operation over the entire operating temperature range (-40°C to 125°C), it's essential to follow proper PCB design and layout guidelines, use a suitable thermal interface material, and ensure adequate heat dissipation. Additionally, consider using a thermally conductive package or a heat sink if necessary.
The recommended input capacitor is a 10uF ceramic capacitor with X7R or X5R dielectric, and the recommended output capacitor is a 22uF ceramic capacitor with X7R or X5R dielectric. These capacitors should be placed close to the device and have a low ESL (Equivalent Series Inductance) to minimize noise and ensure stable operation.
During power-up, the enable pin (EN) should be pulled low until the input voltage reaches the minimum operating voltage (VCC(min)). During power-down, the enable pin should be pulled low before the input voltage drops below VCC(min). This ensures proper device operation and prevents unwanted switching.
The maximum allowed voltage on the output pins during power-down or shutdown is 5.5V. Exceeding this voltage may cause damage to the device or affect its reliability.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
PI3WVR2646GHEX Overview
Use the download button to access the PI3WVR2646GHEX 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like PI3WV,
or try a keyword search, such as Multiplexers or Switches
