4.40 X 3 MM, 1.20 MM HEIGHT, 0.65 MM PITCH, TSSOP-8
Country Of Origin:
Taiwan
ECCN Code:
EAR99
HTS Code:
8542.39.00.01
Factory Lead Time:
12 Weeks
Manufacturer:
Diodes Incorporated
YTEOL:
0
Family:
6C
Input Conditioning:
STANDARD
JESD-30 Code:
R-PDSO-G8
JESD-609 Code:
e3
Length:
4.4 mm
Logic IC Type:
LOW SKEW CLOCK DRIVER
Max I(ol):
0.008 A
Moisture Sensitivity Level:
1
Number of Functions:
1
Number of Terminals:
8
Number of True Outputs:
4
Operating Temperature-Max:
85 °C
Operating Temperature-Min:
-40 °C
Output Characteristics:
3-STATE
Package Body Material:
PLASTIC/EPOXY
Package Code:
TSSOP
Package Equivalence Code:
TSSOP8,.25
Package Shape:
RECTANGULAR
Package Style:
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Cel):
260
Prop. Delay@Nom-Sup:
3 ns
Propagation Delay (tpd):
3 ns
Qualification Status:
Not Qualified
Same Edge Skew-Max (tskwd):
0.15 ns
Seated Height-Max:
1.2 mm
Supply Voltage-Max (Vsup):
3.6 V
Supply Voltage-Min (Vsup):
3 V
Supply Voltage-Nom (Vsup):
3.3 V
Surface Mount:
YES
Temperature Grade:
INDUSTRIAL
Terminal Finish:
Matte Tin (Sn) - annealed
Terminal Form:
GULL WING
Terminal Pitch:
0.65 mm
Terminal Position:
DUAL
Time@Peak Reflow Temperature-Max (s):
30
Width:
3 mm
fmax-Min:
133 MHz
PI6CV2304LEX Frequently Asked Questions (FAQs)
A good PCB layout for the PI6CV2304LEX involves keeping the input and output traces short and separate, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
To ensure proper power-on and power-off sequencing, the PI6CV2304LEX requires a controlled power-up and power-down sequence. The input voltage (VIN) should be applied before the output voltage (VOUT), and the output voltage should be removed before the input voltage. A soft-start circuit can be used to control the power-up sequence.
The PI6CV2304LEX has a maximum output current capability of 4A. However, the actual output current capability may be limited by the thermal performance of the device and the PCB. It is recommended to derate the output current based on the ambient temperature and the thermal performance of the system.
The PI6CV2304LEX has built-in overvoltage protection (OVP) and undervoltage lockout (UVLO) features. However, additional protection circuits may be required to protect the device from voltage transients and spikes. A voltage supervisor or a voltage monitor can be used to detect overvoltage and undervoltage conditions and shut down the device if necessary.
The thermal derating curve for the PI6CV2304LEX is not explicitly provided in the datasheet. However, the device has a maximum junction temperature (TJ) of 150°C. The output current capability of the device should be derated based on the ambient temperature and the thermal performance of the system. A thermal model or simulation can be used to estimate the junction temperature and derate the output current accordingly.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
PI6CV2304LEX Overview
Use the download button to access the PI6CV2304LEX 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like PI6CV,
or try a keyword search, such as Clock Drivers
