IP64, SHORT-CIRCUIT PROTECTION, IT ALSO HAVE UNDER LIGHT RECEIVED CONDITION RESPONSE TIME OF 20 MICRO SECOND
Body Breadth:
6 mm
Body Height:
12.3 mm
Body Length or Diameter:
13.4 mm
Housing:
PLASTIC
Measurement Range-Max (mm):
6 mm
Mounting Feature:
FLANGE MOUNT
Operating Current-Max:
15 mA
Operating Temperature-Max:
55 °C
Operating Temperature-Min:
-25 °C
Output Circuit Type:
Transistor
Output Type:
NPN
Repeatability:
0.01
Response Time:
80 µs
Sensors/Transducers Type:
LINEAR POSITION SENSOR,PHOTOELECTRIC,THROUGH BEAM
Supply Voltage-Max:
24 V
Supply Voltage-Min:
5 V
Surface Mount:
NO
Termination Type:
CABLE
PM-L25-C3 Frequently Asked Questions (FAQs)
Store the components in a dry, cool place, away from direct sunlight and moisture. The recommended storage temperature is between 5°C to 30°C, and humidity below 60%.
Handle the component in an ESD-protected environment, wear an ESD wrist strap or use an ESD mat, and avoid touching the component's pins or leads.
The recommended soldering temperature is between 250°C to 260°C, and the soldering time should not exceed 3 seconds.
Yes, PM-L25-C3 is designed to withstand vibrations up to 10G and shocks up to 100G. However, it's recommended to perform additional testing and validation for specific application requirements.
Use a soft brush and a mild solvent like isopropyl alcohol or a commercial cleaning solution to remove flux residue. Avoid using harsh chemicals or abrasive materials that may damage the component.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
PM-L25-C3 Overview
Use the download button to access the PM-L25-C3 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like PM-L2,
or try a keyword search, such as Linear Position Sensors
