ROHM recommends a PCB layout with a solid ground plane, short and wide traces for the input and output pins, and a decoupling capacitor (e.g., 100nF) between the VIN and GND pins to reduce noise and ensure stable operation.
To ensure SOA, monitor the device's junction temperature (TJ) and keep it below the maximum rating (150°C). Also, ensure the input voltage (VIN) and output current (IOUT) are within the recommended operating ranges, and provide adequate heat dissipation using a heat sink or thermal pad if necessary.
ROHM recommends using a low-ESR ceramic capacitor (e.g., X5R or X7R) with a value between 4.7μF to 10μF for the input capacitor (CIN). This helps to reduce input voltage ripple and ensure stable operation.
While the PML100HZPJV2L0 is rated for operation up to 125°C, it's essential to consider the derating curves and ensure the device operates within its SOA. For high-temperature applications, consider using a heat sink or thermal pad to maintain a safe junction temperature.
To troubleshoot issues, check the input voltage, output current, and PCB layout for any anomalies. Verify that the device is operated within its SOA and that the input and output capacitors are properly selected and placed. Use an oscilloscope to monitor the output voltage and current waveforms, and consult ROHM's application notes and technical support resources for guidance.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
PML100HZPJV2L0 Overview
Use the download button to access the PML100HZPJV2L0 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like PML10,
or try a keyword search, such as Fixed Resistors
