ROHM recommends a 4-layer PCB with a solid ground plane and a separate power plane for the PMR100HZPJV4L0. The device should be placed near the power source, and the input and output capacitors should be placed as close as possible to the device pins. A minimum of 1 oz copper thickness is recommended for the PCB.
To ensure the PMR100HZPJV4L0 operates within its recommended operating conditions, monitor the input voltage, output voltage, and operating temperature. The input voltage should be within the range of 2.5V to 5.5V, the output voltage should be within the range of 0.8V to 3.3V, and the operating temperature should be within the range of -40°C to 105°C.
ROHM recommends using a ceramic capacitor with a value of 1uF to 10uF and an X5R or X7R dielectric. The capacitor should be placed as close as possible to the VIN pin of the PMR100HZPJV4L0.
Yes, the PMR100HZPJV4L0 is rated for operation up to 105°C. However, the device's performance and reliability may degrade at high temperatures. It is recommended to derate the output current and ensure proper thermal management to prevent overheating.
To troubleshoot issues with the PMR100HZPJV4L0, check the input voltage, output voltage, and operating temperature. Verify that the device is properly soldered and that the PCB layout meets the recommended guidelines. Check for any signs of physical damage or overheating. If the issue persists, consult the ROHM Semiconductor support team for further assistance.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
PMR100HZPJV4L0 Overview
Use the download button to access the PMR100HZPJV4L0 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like PMR10,
or try a keyword search, such as Fixed Resistors
