Bourns recommends a symmetrical PCB layout with a solid ground plane, and keeping the input and output traces as short as possible to minimize parasitic inductance and capacitance.
Use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder to the pads. Ensure the inductor is centered and evenly spaced on the pads to prevent mechanical stress.
The maximum allowable voltage across the PQ2614BLA-150K is 150% of the rated voltage (150K) for a maximum of 100ms. Exceeding this voltage may cause damage to the inductor.
The PQ2614BLA-150K is designed for high-frequency applications up to 1MHz. However, at frequencies above 100kHz, the inductor's impedance may increase due to skin effect and proximity effect. Consult Bourns' application notes for high-frequency design considerations.
Yes, the PQ2614BLA-150K is compatible with lead-free soldering processes, but ensure the soldering temperature does not exceed 260°C to prevent damage to the inductor.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
PQ2614BLA-150K Overview
Use the download button to access the PQ2614BLA-150K 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like PQ261,
or try a keyword search, such as Fixed Inductors
