PS2703-1-F3-A footprint, schematic symbol and 3D model by Renesas Electronics

Symbol

PCB Footprints

3D Models

PS2703-1-F3-A Details

A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the analog and digital sections separate, and use a ferrite bead or a 10uF capacitor to filter the power supply.
Use a metal shield or a shielded enclosure to reduce electromagnetic radiation. Ensure proper grounding, and use a common-mode choke or a ferrite bead to filter the power supply.
Power up the VCC pin first, followed by the VDD pin. Ensure that the VCC pin is stable before applying the VDD voltage.
Use a heat sink or a thermal pad to dissipate heat. Ensure good airflow around the device, and avoid blocking the thermal pads on the package.
Use a clock signal with a frequency tolerance of ±100ppm and a jitter of less than 100ps. Ensure the clock signal is clean and free from noise.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the PS2703-1-F3-A schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like PS270, or try a keyword search, such as Optocoupler

Showing 0 results

Image	Part Number	Model
	PS2703-1-F3-A NEC Compound Semiconductor Devices Ltd Transistor Output Optocoupler, 1-Element, 3750V Isolation
	PS2703-1-F3-A NEC Electronics Group Transistor Output Optocoupler, 1-Element, 3750V Isolation
	PS2703-1-F3 NEC Compound Semiconductor Devices Ltd Transistor Output Optocoupler, 1-Element, 3750V Isolation
For a full list of alternate parts for PS2703-1-F3-A, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →