Part Image

PS2705A-1-F3-A - Renesas Electronics

Description: The PS2705A-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor to realize an excellent cost performance. This package is SOP (Small Outline Package) type and has shield effect to cut off ambient light. It is designed for high density mounting applications.

Download PS2705A-1-F3-A Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
PS2705A-1-F3-A - Renesas Electronics PCB footprint - Small Outline Packages - Small Outline Packages - PS2706-1-A
click to zoom
3D Models
PS2705A-1-F3-A - Renesas Electronics  - 3D model - Small Outline Packages - PS2706-1-A
click to zoom

PS2705A-1-F3-A Details

  • Manufacturer Part Number:

    PS2705A-1-F3-A

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Similar Group:

    OC04105510111031100110061028

  • Country Of Origin:

    Japan, Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8541.49.80.00

  • Factory Lead Time:

    18 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    8

  • Additional Feature:

    UL APPROVED

  • Coll-Emtr Bkdn Voltage-Min:

    70 V

  • Configuration:

    SINGLE

  • Current Transfer Ratio-Min:

    50%

  • Dark Current-Max:

    100 nA

  • Forward Current-Max:

    0.05 A

  • Forward Voltage-Max:

    1.4 V

  • Isolation Voltage-Max:

    3750 V

  • JESD-609 Code:

    e6

  • Mounting Feature:

    SURFACE MOUNT

  • Number of Elements:

    1

  • On-State Current-Max:

    0.03 A

  • Operating Temperature-Max:

    100 °C

  • Operating Temperature-Min:

    -55 °C

  • Optoelectronic Device Type:

    AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER

  • Packing Method:

    TR, EMBOSSED, 13 INCH

  • Power Dissipation-Max:

    0.15 W

  • Response Time-Max:

    0.000005 s

  • Surface Mount:

    YES

  • Terminal Finish:

    TIN BISMUTH

PS2705A-1-F3-A Frequently Asked Questions (FAQs)

  • For optimal performance, it is recommended to follow the PCB layout guidelines provided in the application note (ANXXXX) and ensure a thermal resistance of less than 10°C/W. A 4-layer PCB with a solid ground plane and thermal vias is recommended. Additionally, a heat sink with a thermal interface material can be used to improve thermal management.
  • To ensure EMC compliance, follow the guidelines in the application note (ANXXXX) for PCB layout, component placement, and shielding. Additionally, use a metal shielded enclosure, and ensure that all cables and connectors are properly shielded and filtered. It is also recommended to perform EMC testing and certification according to relevant standards (e.g., IEC 61000-4-2).
  • The recommended power-up sequence is to apply the input voltage (VIN) first, followed by the enable signal (EN). For power-down, the enable signal (EN) should be turned off before removing the input voltage (VIN). A soft-start circuit can be used to control the power-up sequence and reduce inrush current.
  • For troubleshooting, start by verifying the power supply voltage, input voltage, and enable signal. Use an oscilloscope to check the output voltage, current, and switching frequency. Check for proper PCB layout, component placement, and thermal management. Consult the application note (ANXXXX) and datasheet for troubleshooting guidelines and FAQs.
  • The PS2705A-1-F3-A is designed to meet the reliability requirements of industrial and automotive applications. The expected lifespan is typically 10-15 years, depending on operating conditions, temperature, and usage. Refer to the reliability report (RRXXXX) for detailed information on failure rates, MTBF, and FIT rates.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

PS2705A-1-F3-A Overview

Use the download button to access the PS2705A-1-F3-A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like PS270, or try a keyword search, such as Optocoupler

Parts related to PS2705A-1-F3-A

Showing 0 results

PS2705A-1-F3-A Alternates

Showing results

Image Part Number Model
Part Image PS2705A-1-F3-A NEC Electronics America Inc

AC Input-Transistor Output Optocoupler, 1-Element, 3750V Isolation, LEAD FREE, PLASTIC, SOP-4

Part Image PS2705A-1-F3 NEC Electronics Group

AC Input-Transistor Output Optocoupler, 1-Element, 3750V Isolation